News Item Image

By Paul Wesslund

We depend on electricity 24/7, but have you ever wondered how it’s made, or where it comes from? To understand the basics of something so important to modern life, think about steam from a teakettle and the magnets stuck to your refrigerator door.

Magnetic metals in nature attract each other because parts of the atoms that make up those metals want to match up with others. Those restless atomic particles are called electrons – and that’s where we get the word “electricity.”

In the early 1800s, a scientist in England named Michael Faraday noticed that when he rotated a metal disk through the middle of a horseshoe-shaped magnet, he could get electrons to flow together in an electric current. Engineers soon took over and made Faraday’s process really complicated – and really useful too.

Today, nearly all our electricity comes from turbines that spin a magnet inside a coil of wires. One way to turn those turbines is by heating liquid into steam that forces the turbine to spin, using the same principle that makes a teakettle whistle. When you boil water on your stove, that liquid expands more than 1,000 times as it vaporizes. If you’ve ever had your hand burned near boiling water, you’ve felt the power that steam produces.

The use of heat to spin a turbine generates more than 80 percent of our electricity, using coal, natural gas or nuclear power as fuel to create the heat.

Coal plants no longer generate the most electric power

Coal is dug from the ground, either near the surface or from deep underground mines. Then it’s shipped to power plants, often by train.

At the power plant site, the coal is stored in large piles on the ground until it’s ready to be burned. The coal chunks are crushed into a fine powder that’s burned in a boiler. The heat from that combustion is used to turn liquid into the steam in a boiler that spins the turbine, generating electricity.

Large transformers at the plant boost the voltage of the electricity (while lowering the current and minimizing line loss potential) for shipment across the country through tall transmission lines. As it gets closer to where it will be used, a substation of transformers reduces the voltage to a level that can be safely delivered to a smaller transformer on the utility pole or pad-mounted transformer in your yard, decreasing the voltage further for use in your home.

As simple as that process sounds, each step is extremely complicated in order to make it as efficient and safe as possible. The furnace burns the coal up to 3,000 degrees Fahrenheit, and the steam it produces gets hotter than 1,000 degrees. Coal also contains harmful elements that get captured and removed through sophisticated pollution controls. This environmental equipment can cost as much as the power plant itself.

Natural gas is a fast-growing source

Ancient plants and animals that died long ago turned into coal, oil and natural gas – that’s why all three of the choices listed here are called fossil fuels.

Like coal, natural gas comes from the ground and can burn in a way that can drive a steam turbine or a natural gas-fired combustion turbine. Unlike coal, you can’t hold natural gas in your hand – it’s a colorless gas, like air, and it has to be transported by pipeline. Natural gas also can be piped directly into homes where it can be burned in water heaters, cooktops, stoves and other appliances.

In a natural gas power plant, specially designed combustion turbines burn the gas to make them spin, generating the electricity. The way natural gas turbines work is similar to a jet engine; in fact, they’re a large, complicated version of what you see hanging on airplane wings.

Natural gas electric generation has advantages over coal: The plants are simpler, cheaper to build, require less staff and they can be shut down and powered up more quickly. Natural gas doesn’t contain as many pollutants as coal, so fewer environmental controls are needed, and burning natural gas produces less greenhouse gas.

In the past, natural gas was more expensive than coal – until the 1990s, when fracking and other new drilling techniques flooded the market. Natural gas prices dropped dramatically, and now many utilities are using it to replace coal generation.

What about the nuclear option?

A nuclear power plant works basically the same as a coal plant – the fuel makes steam to spin a turbine and generator. The difference is that instead of burning coal, heat from a nuclear reactor heats the liquid into steam.

The basic fuel for a nuclear power plant is uranium, which is mined from the ground. It must then be formulated into expensive and complex fuel components for utility use.

A little uranium can last a long time, making it a promising, incredibly cheap power source. And it produces none of the pollution or greenhouse gas that comes from burning coal or natural gas. But the concentrated radioactivity in the nuclear reactor is potentially so dangerous that complex, expensive safety measures need to be part of any nuclear plant. Highly technical control systems need to be in place to slow or shut down the level of heat produced, and the nuclear reactor needs to be inside a strong containment building to keep radioactivity out of the atmosphere in the event of a low-probability accident in the reactor core.

Another controversy still has not been solved: how to dispose of the spent nuclear fuel, which can stay radioactive for millions of years before the radioactivity is brought down to naturally occurring levels in the environment. Most of the spent fuel is currently stored in pools of water and dry storage casks at the site of the nuclear plant.

Coal and nuclear power plants are often referred to as “baseload,” meaning that since co-op member-owners want electricity to be available all the time, these plants are well suited to run all the time. Natural gas long has been considered a fuel for peak loads, meaning it’s used during times of especially high electricity use. But with the drop in prices, natural gas has become a significant and growing source of baseload power for the nation’s electric grid.

So, heat produced by coal, natural gas and nuclear power generates about 80 percent of our electricity. The rest comes mainly from hydroelectric plants, solar and wind.   

 

Paul Wesslund writes on cooperative issues for the National Rural Electric Cooperative Association.

« Back